Skip to content
About us FAQ Become an Affiliate
Flycam Flowline Placid Two Axis Spring Arm

Flycam Flowline Placid Two Axis Spring Arm

(5kg to 20kg)

Save 38% Save 38%
US $400.00
US $400.00 - US $400.00
US $400.00
US $250.00
US $250.00 - US $250.00
US $250.00
SKU : FLCM-FLN-PLA
Also Available in Warehouses:    USA   Canada   Europe

Flycam Flowline Placid Two Axis Spring Arm

01.

THE BEST STABILIZATION SYSTEM FOR THE FLYCAM FLOWLINE
The Flycam Placid is a 2-axis Spring Arm that attaches to the end of your Flycam Flowline and assists in getting a Smooth Shot. It stabilizes and smoothens the shots when you are moving or running with the Flowline by eliminating Vibration and Motion Errors. The Flycam Placid pivots around its axis and provides side to side stabilization along with the Vertical Stabilization.

Flycam Flowline Placid Two Axis Spring Arm
Flycam Flowline Placid Two Axis Spring Arm

02.

CALIBRATE PRECISELY TO YOUR NEEDS
We designed the Placid System to work perfectly with a varied range of setups. Different elements of the arm, such as the Interchangeable Spring Mechanism and the Easy Adjustment Knob, help you to use the perfect spring and easily adjust its tension to balance the setup. The Placid arm can handle all camera-only or camera & gimbal setups weighing between 5kg/11lbs to 20kg/44lbs.

03.

THE INVESTMENT THAT LASTS
The Placid Arm has been built using high-grade Aluminum Alloy and the Springs used in the Placid are made up of Stainless Steel. This gives the arm strength and stability needed to handle constant tension and stress placed upon it while keeping the overall weight low. The use of high-quality material also guarantees that the arm would work perfectly and smoothly year in and year out.

Flycam Flowline Placid Two Axis Spring Arm

IN-ACTION VIDEOS

SPECIFICATIONS

Height

  205mm

Width

  395 mm

Depth

  65mm

Material

  Aluminum, Carbon Steel, Stainless Steel, EPDM rubber

Max Load

  20Kg / 44lb

Min Load

  5kg/ 11lb

Weight of product

  1.80Kg / 3.96lb

Foam Packing Dimension

  LxWxH : 42cmx20.5cmx12cm

Packing Weight

  2.40kg

Tilt Range

  40° Up/ Down

Side to Side Movement

  180°

IN THE BOX

Flycam Flowline Placid Two Axis Spring Arm
2x Tension Spring - Absolutely FREE
Foam Packing

 

USER MANUAL

Flycam Flowline Placid Flycam Flowline Placid Two Axis Spring Arm (FLCM-FLN-PLA)

PLACID AROUND THE WORLD

Flycam Flowline Placid Two Axis Spring Arm
Flycam Flowline Placid Two Axis Spring Arm
delivery

Guaranteed Fast Delivery
For all orders
customer service

Quick and Efficient
Customer service
easy returns

Easy Returns
Up to 30 days
warranty

1-Year Warranty
On All Products
Customer Reviews
5.0 Based on 3 Reviews
5 ?
100% 
3
4 ?
0% 
0
3 ?
0% 
0
2 ?
0% 
0
1 ?
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
V
05/26/2021
Vít
Czechia Czechia

A great tool

This is an excellent tool, I bought it with a bit of scepticism, but its substantial extension!

Flycam Flowline Placid Two Axis Spring Arm
Was this helpful?  0    0
WC
04/08/2020
William C.

Brilliant tool providing a much more natural movement on an Easyrig

Shooting on Blackmagic URSA Mini Pro 4.6k rigged with matte box, follow focus, large V-mount, lens, shotgun mic onto an Easyrig MiniMax. Installation was easy. Now that is all done everything works great, the different resistance springs are very useful for fine tuning/different camera rig weights. This isn't a steady cam and won't make your shots magically smooth (you'll need a gimbal or steady cam operator for that) but it does make handheld work feel less jittery and a little more natural. I'd compare the end result to having a solid shoulder rig but with much more flexibility for shooting high/low and run and gun. Not to mention having all the weight on your back with the Easyrig meaning you're getting better shots all day. I'm quite tall and found that the line isn't long enough even when fully extended to get shots very low to the ground, so I'll either have to crouch/kneel or dismount the camera from the Easyrig in order to get walking shots on the ground. Then again, if you're under 6ft you might find it more achievable. I'd highly recommend this as an alternative to the much more expensive competitor.

Flycam Flowline Placid Two Axis Spring Arm
Was this helpful?  0    0
J
07/16/2018
James

Five Stars

Worked great and best of all the awesome customer service!

Flycam Flowline Placid Two Axis Spring Arm
Was this helpful?  0    0

Q&A

Ask a Question



  • Does this come with the Flycam Flowline?

    No, the Flycam FLowline is not included.

  • Can this hold gimbal and dslr?

    We provide 2 springs with this spring arm i.e. 5-12kg and 12-20kg. This flowline placid arm will work with all our flowline models depending on the weight capacity of each model.

  • Can I purchase extra spring of higher strength to change and use heavier camera with it?

    We provide 2 springs with this spring arm i.e. 5-12kg and 12-20kg.

  • Will this work with my easyrig model?

    Yes, this will work with your easyrig model. You just need to drill a hole for mounting the placid arm onto your rig.

  • Does it come in bag packing?

    No, it does not include a bag. The complete components of this placid arm are packed in a foam packing box for safe storage.

  • What is the warranty?

    We provide 1 year warranty from the date of purchase. Items which are covered by the warranty period will be replaced at no cost to the customer. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired.

  • What is the warranty?

    We provide 1 year warranty from the date of purchase. Items which are covered by the warranty period will be replaced at no cost to the customer. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired.

  • Does it come in bag packing?

    No, it does not include a bag. The complete components of this placid arm are packed in a foam packing box for safe storage.

  • Will this work with my easyrig model?

    Yes, this will work with your easyrig model. You just need to drill a hole for mounting the placid arm onto your rig.

  • Can I purchase extra spring of higher strength to change and use heavier camera with it?

    We provide 2 springs with this spring arm i.e. 5-12kg and 12-20kg.

  • Can this hold gimbal and dslr?

    We provide 2 springs with this spring arm i.e. 5-12kg and 12-20kg. This flowline placid arm will work with all our flowline models depending on the weight capacity of each model.

  • Does this come with the Flycam Flowline?

    No, the Flycam FLowline is not included.

  • I have the FLYCAM Flowline 400N, does it works with it for sure?

    Yes, the Placid Two Axis Spring Arm is compatible with all of our Flycam Flowline models.

  • Hi there! Does it work with Easyrig Minimax? You've mentioned I have to drill a hole, do you have a step by step demonstration video? Thank you so mcuh!

    Our Flowline Placid Two Axis Spring Arm is compatible with all Flowline model. But to make it compatible with Easyrig Minimax you need to drill on the top bar of the Easyrig.

  • Is there any way to lock the spring when you dont want to use stabilization?

    There is no option of locking the spring in the Flycam Flowline Placid arm.

  • I own a Minimax EasyRig and I was wondering if this would fit/compatible with the set up I own.

    The Flycam Placid two axis spring arm is compatible with the Easyrig minimax. For that, you need to make drilling in the top bar of the Easyrig.